| Sensors | |
| Calibration of Correlation Radiometers Using Pseudo-Random Noise Signals | |
| Isaac Ramos Pérez1  Xavi Bosch-Lluis1  Adriano Camps1  Nereida Rodriguez Alvarez1  Juan Fernando Marchán Hernandez1  Enric Valencia Domènech1  Carlos Vernich2  Sonia de la Rosa2  | |
| [1] Remote Sensing Lab., Dept. Signal Theory and Communications, Universitat Politècnica de Catalunya (UPC) Campus Nord, Bldg D3, E-08034 Barcelona, Spain; E-Mails:;DAS Photonics, Ciudad Politécnica de la Innovación, Camino de Vera s/n, Edificio 8F, E-46022 Valencia, Spain; E-Mails: | |
| 关键词:
correlation radiometers;
calibration;
Pseudo-Random Noise;
|
|
| DOI : 10.3390/s90806131 | |
| 来源: mdpi | |
PDF
|
|
【 摘 要 】
The calibration of correlation radiometers, and particularly aperture synthesis interferometric radiometers, is a critical issue to ensure their performance. Current calibration techniques are based on the measurement of the cross-correlation of receivers’ outputs when injecting noise from a common noise source requiring a very stable distribution network. For large interferometric radiometers this centralized noise injection approach is very complex from the point of view of mass, volume and phase/amplitude equalization. Distributed noise injection techniques have been proposed as a feasible alternative, but are unable to correct for the so-called “baseline errors” associated with the particular pair of receivers forming the baseline. In this work it is proposed the use of centralized Pseudo-Random Noise (
【 授权许可】
CC BY
© 2009 by the authors; licensee MDPI, Basel, Switzerland
【 预 览 】
| Files | Size | Format | View |
|---|---|---|---|
| RO202003190056343ZK.pdf | 670KB |
PDF