Comparison of Energy Dissipation, Stiffness, and Damage of Structural Oriented Strand Board (OSB), Conventional Gypsum, and Viscoelastic Gypsum Shearwalls Subjected to Cyclic Loads

Buildings

David W. Dinehart¹ 

[1] Department of Civil and Environmental Engineering, Villanova University, 800 Lancaster Avenue, Villanova, PA 19085, USA

关键词: wood shearwall;    seismic;    gypsum;    viscoelastic polymer;    energy dissipation;   

DOI  :  10.3390/buildings2030173

来源: mdpi

【 摘 要 】

A key element in the seismic load resisting system of a wood framed structure is the shear wall which is typically sheathed on one side with plywood or oriented strand board (OSB) and gypsum on the other. The shear capacity of gypsum sheathed shear walls is typically neglected in high seismic areas due to the susceptibility of conventional drywall screw connections to damage caused by earthquakes. The earthquake resistance of an innovative viscoelastic (VE) gypsum shearwall is evaluated and compared to conventional structural and non-structural walls. Ten 8 ft × 8 ft wood framed wall specimens of three configurations [nailed-OSB, screw-gypsum, and VE polymer-gypsum] were subjected to a cyclic test protocol. The energy dissipation, stiffness, and damage characteristics of all shearwalls are reported herein. Testing results indicate the VE-gypsum walls can dissipate more energy than the OSB structural panels and 500% more energy that the conventional gypsum sheathed walls and contains a constant source of energy dissipation not seen in the structural and non-structural walls. The wall stiffness of the OSB wall degrades at a far greater rate that the VE gypsum wall and at continued cycling degrades below the VE wall stiffness. Unlike both of the conventional wall types, the VE wall showed no visible or audible signs of damage when subjected to shear displacements up to 1.

【 授权许可】

CC BY   
© 2012 by the authors; licensee MDPI, Basel, Switzerland.