A Vibration-Based MEMS Piezoelectric Energy Harvester and Power Conditioning Circuit

Sensors

Hua Yu¹  Jielin Zhou¹  Licheng Deng¹ 

[1] College of Optoelectronic Engineering, Chongqing University, Chongqing 400044, China; E-Mails:

关键词: energy harvester;    PZT;    MEMS;    power conditioning circuit;   

DOI  :  10.3390/s140203323

来源: mdpi

【 摘 要 】

This paper presents a micro-electro-mechanical system (MEMS) piezoelectric power generator array for vibration energy harvesting. A complete design flow of the vibration-based energy harvester using the finite element method (FEM) is proposed. The modal analysis is selected to calculate the resonant frequency of the harvester, and harmonic analysis is performed to investigate the influence of the geometric parameters on the output voltage. Based on simulation results, a MEMS Pb(Zr,Ti)O₃ (PZT) cantilever array with an integrated large Si proof mass is designed and fabricated to improve output voltage and power. Test results show that the fabricated generator, with five cantilever beams (with unit dimensions of about 3 × 2.4 × 0.05 mm³) and an individual integrated Si mass dimension of about 8 × 12.4 × 0.5 mm³, produces a output power of 66.75 μW, or a power density of 5.19 μW·mm⁻³·g⁻² with an optimal resistive load of 220 kΩ from 5 m/s² vibration acceleration at its resonant frequency of 234.5 Hz. In view of high internal impedance characteristic of the PZT generator, an efficient autonomous power conditioning circuit, with the function of impedance matching, energy storage and voltage regulation, is then presented, finding that the efficiency of the energy storage is greatly improved and up to 64.95%. The proposed self-supplied energy generator with power conditioning circuit could provide a very promising complete power supply solution for wireless sensor node loads.

【 授权许可】

CC BY   
© 2014 by the authors; licensee MDPI, Basel, Switzerland.