Dynamic Simulation of a CPV/T System Using the Finite Element Method

Energies

Carlo Renno²  Michele De Giacomo¹ 

[1] University of Salerno, Via Giovanni Paolo II, 132, 84084 Fisciano (Salerno), Italy; E-Mail:;Department of Industrial Engineering, University of Salerno, Via Giovanni Paolo II, 132, 84084 Fisciano (Salerno), Italy

关键词: CPV/T system;    heat recovery;    DNI modeling;    finite element method;   

DOI  :  10.3390/en7117395

来源: mdpi

【 摘 要 】

The aim of this paper is the determination of a concentrating thermo-photovoltaic (CPV/T) system dynamic model by means of the finite element method (FEM). The system consist of triple-junction InGaP/InGaAs/Ge (indium-gallium phosphide/indium-gallium-arsenide/germanium) solar cells connected to a metal core printed circuit board (MCPCB) placed on a coil circuit used for the thermal energy recovery. In particular, the main aim is to determine the fluid outlet temperature. It is evaluated corresponding both to a constant cell temperature equal to 120 °C, generally representing the maximum operating temperature, and to cell temperature values instantly variable with the direct normal irradiation (DNI). Hence, an accurate DNI analysis is realized adopting the Gordon-Reddy statistical model. Using an accurate electric model, the cell temperature and efficiency are determined together with the CPV/T module electric and thermal powers. Generally, the CPV system size is realized according to the user electric load demand and, then, it is important to evaluate the necessary minimum concentration ratio (C_min), the limit of CPV system applicability, in order to determine the energy convenience profile. The fluid outlet temperature can be then obtained by the FEM analysis to verify if a CPV/T system can be used in solar heating and cooling applications.

【 授权许可】

CC BY   
© 2014 by the authors; licensee MDPI, Basel, Switzerland.