Series Arc Fault Detection Algorithm Based on Autoregressive Bispectrum Analysis

Algorithms

Kai Yang¹  Rencheng Zhang¹  Shouhong Chen¹  Fujiang Zhang¹  Jianhong Yang¹  Xingbin Zhang¹ 

[1] College of Mechanical Engineering and Automation, Huaqiao University, Xiamen 361021, China; E-Mails:

关键词: arc fault detection;    autoregressive model;    bispectrum analysis;    Gaussian noise;    high frequency signal;    electrical fire;   

DOI  :  10.3390/a8040929

来源: mdpi

【 摘 要 】

Arc fault is one of the most critical reasons for electrical fires. Due to the diversity, randomness and concealment of arc faults in low-voltage circuits, it is difficult for general methods to protect all loads from series arc faults. From the analysis of many series arc faults, a large number of high frequency signals generated in circuits are found. These signals are easily affected by Gaussian noise which is difficult to be eliminated as a result of frequency aliasing. Thus, a novel detection algorithm is developed to accurately detect series arc faults in this paper. Initially, an autoregressive model of the mixed high frequency signals is modelled. Then, autoregressive bispectrum analysis is introduced to analyze common series arc fault features. The phase information of arc fault signal is preserved using this method. The influence of Gaussian noise is restrained effectively. Afterwards, several features including characteristic frequency, fluctuation of phase angles, diffused distribution and incremental numbers of bispectrum peaks are extracted for recognizing arc faults. Finally, least squares support vector machine is used to accurately identify series arc faults from the load states based on these frequency features of bispectrum. The validity of the algorithm is experimentally verified obtaining arc fault detection rate above 97%.

【 授权许可】

CC BY   
© 2015 by the authors; licensee MDPI, Basel, Switzerland.