Green Hydrogen Production by Mechanical Mixing of Aluminum with Water

JOURNAL OF CHEMICAL ENGINEERING OF JAPAN

Shunsuke Ooya⁴  Takao Kobayashi¹  Masatoshi Sugioka³  Yoshio Uemichi⁵  Kazuyuki Higashino³  Yasuharu Kanda⁵  Shinji Kondo² 

[1] Technical Division, Muroran Institute of Technology;Department of Applied Chemistry, Muroran Institute of Technology;Aeronautics and Astronautics Unit, College of Design and Manufacturing Technology, Graduate School of Engineering, Muroran Institute of Technology;Division of Applied Chemistry, Graduate School of Engineering, Muroran Institute of Technology;Applied Chemistry Research Unit, College of Environmental Technology, Graduate School of Engineering, Muroran Institute of Technology

关键词: Green Hydrogen;    Hydrogen Production;    Mechanical Mixing;    Aluminum;    Water;   

DOI  :  10.1252/jcej.10we272

来源: Maruzen Company Ltd

【 摘 要 】

References(12)A novel, green method for hydrogen (H2) production was studied; the method involves the mechanical mixing of aluminum (Al) with water (H2O). We examined the use of glass and stainless steel reactors. When the glass reactor was used, the induction period of the reaction of Al with H2O was long. The induction period decreased remarkably upon increasing the revolution rate; the optimal revolution rate was 1250 rpm. Furthermore, the reaction of Al with H2O in the stainless steel reactor was examined to investigate the practical feasibility of this H2 production method. In this case too an induction period was observed, and the induction period decreased upon increasing the reaction temperature and Al weight.

【 授权许可】

Unknown