Catalytic Oxidation of Dichloromethane over Anodized Aluminum Film

JOURNAL OF CHEMICAL ENGINEERING OF JAPAN

Yu Guo¹  Lifeng Wang¹  Makoto Sakurai¹  Hikaru Tsuji¹  Hideo Kameyama¹ 

[1] Department of Chemical Engineering, Faculty of Engineering, Tokyo University of Agriculture and Technology

关键词: Dichloromethane;    Anodic Oxidation;    Hydration Reaction;   

DOI  :  10.1252/jcej.39.173

来源: Maruzen Company Ltd

【 摘 要 】

References(18)Cited-By(6)Catalytic total combustion of dichloromethane over anodized aluminum film was studied. Conversion of dichloromethane varies with the acidity of the catalysts, which depends on the hydration reaction on the anodized aluminum films. The effect of the hydration reaction time on the conversion of dichloromethane was discussed. The catalyst with a hydration reaction time of 90 min exhibits the highest activity for the oxidation of dichloromethane, because of the strongest acidity. The distribution of products was also discussed. When the reaction temperature was below 623 K, no molecular chlorine was detected. HCl, CO, CO2 and CH3Cl were detected in the reactor outlet. With an increased reaction temperature, molecular chlorine was generated. Catalyst deactivation was also investigated in this work. Compared with γ-Al2O3, the anodized aluminum film has excellent hydrophilic properties, thus no deactivation was observed during the deactivation experiment that lasted for 120 h at 673 K with 1000 ppm dichloromethane.

【 授权许可】

Unknown