期刊论文详细信息
JOURNAL OF CHEMICAL ENGINEERING OF JAPAN
Design of an Auto-Tuning PID Controller by a Generalized Predictive Control Method
Reginald K. Wood2  Masao Imaeda1  Wenlong Zhang1  Kyoji Hashimoto1 
[1] Department of Mechanical Engineering, Faculty of Engineering, University of Tokushima;Department of Chemical and Materials Engineering, University of Alberta
关键词: Process Control;    Auto-Tuning PID Control;    Generalized Predictive Control;    ARMAX Model;    Kalman Filter;   
DOI  :  10.1252/jcej.38.147
来源: Maruzen Company Ltd
PDF
【 摘 要 】

References(11)Cited-By(3)In this work, an auto-tuning PID controller based on the generalized predictive control (GPC) method is proposed for on-line tuning of the controller parameters due to the changes in operating conditions. The proposed scheme is applied to the control of a distillation column, with identification of the parameters of an ARMAX model determined from the operating data of an industrial column. An evaluation of the maximum likelihood (ML) and Kalman filter (KF) methods of identification showed that at a 10-second sample interval, reliable model parameters could be predicted using either the ML or KF method. However, at a 60-second sample interval simulation results showed that only the KF method generated reliable parameters. Column control was studied for an objective of maintaining constant liquid temperature on an intermediate tray, in the presence of a disturbance in the feed flow rate, with the top product flow rate being a manipulated variable. The simulation results for the auto-tuning PID control scheme using the GPC formulation are compared to the control performance which was obtained using a tuned conventional PID controller and also GPC, at a 60-second sample interval.

【 授权许可】

Unknown   

【 预 览 】
附件列表
Files Size Format View
RO201912080695677ZK.pdf 19KB PDF download
  文献评价指标  
  下载次数:14次 浏览次数:11次