Bubble Size Measurement in a Gas-Liquid Ejector for a Sodium Chloride-Air System

JOURNAL OF CHEMICAL ENGINEERING OF JAPAN

P. T. Raghuram¹  T. R. Das¹ 

[1] Department of Chemical Engineering, Indian Institute of Science

关键词: Bubble Size Measurement;    Ejector;    Photographic Method;    Sauter Mean Diameter;    Non-reactive System;   

DOI  :  10.1252/jcej.35.389

来源: Maruzen Company Ltd

【 摘 要 】

References(11)A high speed photographic technique has been employed to measure the Sauter mean diameter of bubbles experimentally in a gas liquid ejector using a sodium chloride-air system. The measured values are compared with the theoretically predicted maximum bubble size diameter using Sprow’s correlation. Bubble size as a function of the liquid flow rate and also of its distance from the throat of the ejector has been reported in this paper. The results obtained for this non-reactive system are also compared with those obtained earlier for the air-water system.

【 授权许可】

Unknown