DC resistivity of alumina and zirconia sintered with TiC

Bulletin of materials science

Dibyendu Chakravarty¹  Probal K Das²  Soumyadip Roy¹ 

[1] College of Ceramic Technology, Kolkata 700 010, India$$College of Ceramic Technology, Kolkata 700 010, IndiaCollege of Ceramic Technology, Kolkata 700 010, India$$;Central Glass and Ceramic Research Institute, Kolkata 700 032, India$$Central Glass and Ceramic Research Institute, Kolkata 700 032, IndiaCentral Glass and Ceramic Research Institute, Kolkata 700 032, India$$

关键词: Alumina;    zirconia;    titanium carbide;    composite;    electrical conductivity;    electrical resistivity.;   

DOI  :  

学科分类：材料工程

来源: Indian Academy of Sciences

【 摘 要 】

Pure alumina and zirconia powders were sintered separately with increasing amount of TiC up to ∼ 65 vol.%, as a conducting second phase with an aim to prepare conducting structural ceramics which can be precisely machined by EDM technique. TiC did not help in sintering the parent phase but it decreased the d.c. resistivity of the composite to 1 ohm.cm at ∼ 30 vol.% loading. The conductivity is explained by the effective media and percolation theories.

【 授权许可】

Unknown