Crack propagation studies and bond coat properties in thermal barrier coatings under bending

Bulletin of materials science

N Roy¹  K M Godiwalla¹  A K Ray¹ 

[1] National Metallurgical Laboratory, Jamshedpur 831 007, India$$National Metallurgical Laboratory, Jamshedpur 831 007, IndiaNational Metallurgical Laboratory, Jamshedpur 831 007, India$$

关键词: Coating;    thermal barrier;    bond coat;    superalloy;    crack propagation;    zirconia;    plasma spraying;    stress;    strain;    modulus.;   

DOI  :  

学科分类：材料工程

来源: Indian Academy of Sciences

【 摘 要 】

Ceramic based thermal barrier coatings (TBC) are currently considered as a candidate material for advanced stationary gas turbine components. Crack propagation studies under bending are described that were performed on plasma sprayed ZrO₂, bonded by MCrAlY layer to Ni base superalloy. The crack propagation behaviour of the coatings at room temperature in as received and oxidized conditions revealed a linear growth of the cracks on the coating till the yield point of the super alloy was reached. High threshold load at the interface between the ceramic layer and the bond coat was required to propagate the crack further into the bond coat. Once the threshold load was surpassed the crack propagated into the brittle bond coat without an appreciable increase in the load. At temperatures of 800°C the crack propagated only in the TBC (ceramic layer), as the ductile bond coat offered an attractive sink for the stress relaxation. Effects of bond coat oxidation on crack propagation in the interface region have been examined and are discussed.

【 授权许可】

Unknown