Predictions of Propagation Behavior of Semi-Elliptical Slant Surface Cracks in Residual Stress Fields Based on Simulations of the Partial Elastic Contact of Crack Surfaces

Journal of Computational Science and Technology

Masahiro TSUJI²  Shiro KUBO²  Hiroyuki TOKUMASU¹ 

[1] Mitsubishi Heavy Industries Ltd.;Department of Mechanical Engineering, Osaka University

关键词: Simulation;    Semi-Elliptical Slant Surface Crack;    Partial Elastic Contact;    Fatigue Crack Propagation Path;    Life Prediction;    Residual Stress;    Finite Element Method;   

DOI  :  10.1299/jcst.3.476

学科分类：地球科学(综合)

来源: Japan Academy

【 摘 要 】

References(19)In residual stress fields, the so-called partial elastic contact of crack surfaces sometimes occurs, where a fatigue crack is closed at the crack mouth while it is open at the crack tip. The partial elastic contact has a significant effect on the lives of fatigue cracks. However, there are few studies on the partial elastic contact of crack surfaces for three-dimensional cracks. In this paper, the propagation paths and lives of semi-elliptical slant surface fatigue cracks are predicted. The finite element method was employed for these simulations. The residual stress was introduced by applying an equivalent nodal force in correspondence with initial strains. The results of the propagation paths and lives considering the partial elastic contact of crack surfaces differed from those without consideration of the elastic contact. In particular the estimated results of the crack propagation rate sometimes brought one-order difference. These results demonstrate the necessity of simulation considering the partial elastic contact of crack surfaces.

【 授权许可】

Unknown