Proposal of a slotted circular waveguide as an open-circuited standard for calibration of L-band network analyzers

IEICE Electronics Express

Carlos A. Bonilla Barragán¹  Ángel G. Andrade Reátiga¹  Alejandro Dueñas Jiménez² 

[1] Facultad de Ingeniería, Universidad Autónoma de Baja California;Departamento de Electrónica, Universidad de Guadalajara

关键词: calibration standard;    circular waveguide;    FDTD simulation;    network analyzer;    open-circuited;    slots;   

DOI  :  10.1587/elex.7.1646

学科分类：电子、光学、磁材料

来源: Denshi Jouhou Tsuushin Gakkai

【 摘 要 】

References(10)This paper presents a slotted circular waveguide as an open-circuited standard structure. This device as well as its previous stages are simulated with a 3D FDTD program. The dimensions are based on estimations of the MM8048B1® open-circuited standard. The results obtained through a variational method and a static MoM simulation, when compared with those obtained by means of 3D FDTD simulation, are found to be in good agreement, especially in the L-band.

【 授权许可】

Unknown