On the 3D printing of recycled ABS, PLA and HIPS thermoplastics for structural applications

PSU Research Review

Rupinder Singh^1¹  Ranvijay Kumar^1² 

[1] Department of Engineering, University of Naples , Naples, Italy ...Show all authors^2;Department of Production Engineering, Guru Nanak Dev Engineering College , Ludhiana, India^1

关键词: FDM;    Multi-material printing;    ABS;    Mechanical properties;    Thermal;   

DOI  :  10.1108/PRR-07-2018-0018

学科分类：社会科学、人文和艺术（综合）

来源: Emerald Publishing

【 摘 要 】

Purpose Three-dimensional printing (3DP) is an established process to print structural parts of metals, ceramic and polymers. Further, multi-material 3DP has the potentials to be a milestone in rapid manufacturing (RM), customized design and structural applications. Being compatible as functionally graded materials in a single structural form, multi-material-based 3D printed parts can be applied in structural applications to get the benefit of modified properties. Design/methodology/approach The fused deposition modelling (FDM) is one of the established low cost 3DP techniques which can be used for printing functional/ non-functional prototypes in civil engineering applications. Findings The present study is focused on multi-material printing of primary recycled acrylonitrile butadiene styrene (ABS), polylactic acid (PLA) and high impact polystyrene (HIPS) in composite form. Thermal (glass transition temperature and heat capacity) and mechanical properties (break load, break strength, break elongation, percentage elongation at break and Young’s modulus) have been analysed to observe the behaviour of multi-material composites prepared by 3DP. This study also highlights the process parameters optimization of FDM supported with photomicrographs. Originality/value The present study is focused on multi-material printing of primary recycled ABS, PLA and HIPS in composite form.

【 授权许可】

CC BY