Real Time Water Quality Monitoring Boat

Proceedings

Kumar, Hitesh¹  Kumar, Sanjay²  Hassan, Moez ul³  Kumar, Kabir⁴ 

[1] Author to whom correspondence should be addressed.;Biosciences Department, SZABIST, Karachi 75600, Pakistan;Mechatronics Engineering Department, SZABIST, Karachi 75600, Pakistan;Presented at Environment, Green Technology and Engineering International Conference (EGTEIC 2018), Caceres, Spain, 18–20 June 2018

关键词: quality monitoring;    sensors;    physiochemical parameters;    radio frequency module;   

DOI  :  10.3390/proceedings2201279

学科分类：社会科学、人文和艺术（综合）

来源: mdpi

【 摘 要 】

In today’s third world countries such as Pakistan, there is an ever increasing strain regarding the provision of clean, consumable water. This problem especially arises in rural areas due to the ineffectiveness of the governments and the increasing population in the country. Therefore, this particular project aims to detect and display real-time physiochemical quality of the water in a much more cost effective manner, as opposed to the current methods which involves sampling and laboratory methods, through its wireless, multi-sensor network. It takes into consideration multiple factors and presents this real-time quality through the display of its electrical conductivity, pH, total dissolved solids TDS, turbidity, as well as temperature of water that is being tested. Additionally, this remote control system is specially designed for lakes, reservoir, rivers etc. where we cannot monitor water quality in such complicated scale water environment by just using a stationary system because water parameter vary at every single location. To avoid this, we manufactured a boat which can float and move on the water simply by user controller. This structure is designed as a hull shape which minimize the resistivity of water flow and this shape also maintained the stability of water. This water quality monitoring boat includes an embedded global positioning system GPS which gives the location of the point wherever water quality is varying and radio frequency module for wireless communication. All the results is generated and displayed with their readings and their graphical analogue meters through the graphical user interface GUI technique, along with water’s impurities limitation points and its hazardous level notification. It is proven through various tests conducted in reservoirs, lakes and personal water storage tanks that this project is successfully capable of demonstrating these physiochemical parameters as well as display these readings effectively.

【 授权许可】

CC BY