A STUDY ON THE ESTIMATION METHOD OF THE FORM FACTOR FOR A FULL-SCALE SHIP

Brodogradnja

article

Lee, Young-Gill¹  Ha, Yoon-Jin²  Lee, Seunng-Hee¹  Kim, Sang Hyun¹ 

[1] Dept. of Naval Architecture and Ocean Engineering, Inha University, Incheon, Republic of Korea;Korea Research Institute of Ship and Ocean Engineering, DaeJeon, Republic of Korea

关键词: Reynolds number;    Form factor;    Effective power;    Delivered power;    Geosim models;   

DOI  :  10.21278/brod69105

学科分类：工程和技术（综合）

来源: Brodarski Institut

【 摘 要 】

In this study, a prediction method of the form factor for a full-scale ship is suggested to minimize the power prediction error from a small model ship. Numerical simulations were carried out at various Reynolds numbers from a small model to a full-scale ship. The variation of the form factors was investigated from the results of the numerical simulation according to the Reynolds numbers. In addition, the results from the numerical simulations and experimental data of the geosim models were utilized to drive the correlation line and predict the form factor of a full-scale ship. The correlation line was applied to predict the effective power and the delivered power of a full-scale ship. As a result, the developed prediction method confirmed the possibility of predicting the power reliably from experiments using a small model.

【 授权许可】

CC BY