Evaluation of Many Load Tests of Passive Rock Bolts in the Czech Republic

GeoScience Engineering

Ondřej Holý¹ 

关键词: loading test;    rock bolt;    drilling;    rock mass;    friction;    failure;    core drilling;   

DOI  :  10.1515/gse-2017-0001

学科分类：地球科学(综合)

来源: De Gruyter

【 摘 要 】

Within the research project “FR-TI4/329 Research and development - creating an application system for the design and analysis of soil and rock anchors including the development of monitoring elements”, an extensive stage of field load tests of rock bolts was carried out. The tests were conducted at 14 locations with varied rock composition. Before the initial tests, a loading stand was designed and constructed. A total of 201 pieces of tensile tests of bolts having lengths from 0.5 up to 2.5 m, a diameter of 22-32 mm, were performed. These were fully threaded rods, self-drilling rods, and fiberglass rods. The bolts were clamped into the cement and resin. The loading tests were always performed until material failure of bolts or shear stress failure at the interface cement-rock. At each location, basic geotechnical survey was carried out in the form of core drilling in a length of 3.0 metres with the assessment of the rock mass in situ, and laboratory testing of rock mechanics. Upon the completion of testing protocols, rock mass properties analysis was performed focusing on the evaluation of shear friction at the grouting-rock interface.

【 授权许可】

Unknown