Preparation and Characterization of Antibacterial Dental Resin Cement Material

Journal of the Korean Chemical Society

Duck Hyun Kim¹ 

关键词: 3-hydroxypyridine;    2-isocyanatoethyl methacrylate;    Antibacterial;    Higher strength;    Dental resin cement;   

DOI  :  

学科分类：化学（综合）

来源: Korean Chemical Society

【 摘 要 】

Bis-GMA, TEGDMA, and camphorquinone were used as the main material, cross-linking agent, and photoinitiator, respectively. In addition, 2-isocyanatoethyl methacrylate was used as an additive for high strength, while the 3-hydroxypyridine was used as an additive for antibacterial activity. Photopolymerization was also carried out at a 440-480 nm wavelength and at about 1000 mW/cm2 intensity for about 40 seconds. The breaking strength measurement of the samples showed that the breaking strength increased along with increasing the addition ratio of IEM, while it took less time until the polymerization was complete, thereby suggesting that the degree of polymerization has the tendency to increase. And also, compared to the size of the clear zone formed by ampicillin, the 3-hydroxypyridine group exhibited antimicrobial activity induced by ampicillin. The results of this study suggest that the use of 2-isocyanatoethyl methacrylate as an additive for high strength and 3-hydroxypyridine as an additive for improved antibacterial activity would improve the usability of the fabricated polymer as a dental resin cement material with high functionality.

【 授权许可】

Unknown