Comparison of Microstructure and Mechanical Properties of Induction and Vacuume Brazed Joint of Titanium Via Copper and Ag-Cu Eutectic Filler Metal / Mikrostruktura I Właściwości Mechaniczne Połączeń Tytanu Lutowanych Indukcyjnie I Próżniowo Z Użyciem Spoiwa Miedzianego I Eutektycznego Ag-Cu

Archives of Metallurgy and Materials

M. Różański¹  D. Majewski¹  K. Krasnowski¹ 

[1] Institute of Welding, Department of Welding Technology,14 B?. Czes?awa Str., 44-100 Gliwice, Poland

关键词: Keywords: induction brazing;    vacuum brazing;    titanium;    mechanical properties of brazed joints;    microstructure of brazed joint;   

DOI  :  10.1515/amm-2015-0419

学科分类：金属与冶金

来源: Akademia Gorniczo-Hutnicza im. Stanislawa Staszica / University of Mining and Metallurgy

【 摘 要 】

This study presents the basic physico-chemical properties and describes the brazeability of titanium. The work contains the results of macro and microscopic metallographic examination as well as the results of strength-related tests of vacuum and induction brazed joints made of Grade 2 technical titanium using the Cu 0.99 and Ag 272 filler metal interlayers and F60T flux intended for titanium brazing in the air atmosphere.

【 授权许可】

Unknown