The Influence of Treatment Parameters on the Microstructure, Properties and Bend Angle of Laser Formed Construction Bars

Archives of Metallurgy and Materials

P. Kurp¹  S. Tofil¹  K. Mulczyk¹  Z. Mucha¹ 

[1] KIELCE UNIVERSITY OF TECHNOLOGY, LASER PROCESSING RESEARCH CENTRE, 7th TYSI?CLECIA P.P. AV. 25-314 KIELCE, POLAND

关键词: Keywords: Laser forming;    Laser treatment;    Microstructure;    Fourier number;   

DOI  :  10.1515/amm-2016-0192

学科分类：金属与冶金

来源: Akademia Gorniczo-Hutnicza im. Stanislawa Staszica / University of Mining and Metallurgy

【 摘 要 】

In this paper, the authors presented the research on laser formed construction bars made of C20 steel on the example of the T-shape. The CO2 TRUMPF TruFlow 6000 laser was used in the research. The influence of the laser treatment parameters (the power and speed of the heat source) on the volume of the bend angle, structure and properties of the elements (hardness and tensile strength) was examined. On the basis of the results obtained from the conducted experiments, the authors suggested a way of selecting treatment parameters so that the element should meet the strength assumptions at the allowable time of its implementation.

【 授权许可】

Unknown