Tempering Temperature Effects on Hardness and Impact Toughness of 56NiCrMo7 Steel

Archives of Metallurgy and Materials

R. Dąbrowski¹  R. Dziurka¹ 

[1] Faculty of Metals Engineering and Industrial Computer Science, Agh University of Science and Technology, 30-059 Kraków, 30 Mickiewicza Av., Poland

关键词: Keywords: hot work tool steel;    heat treatment;    microstructure;    hardness;    impact toughness;    fractographic examination;   

DOI  :  10.2478/v10172-011-0001-4

学科分类：金属与冶金

来源: Akademia Gorniczo-Hutnicza im. Stanislawa Staszica / University of Mining and Metallurgy

【 摘 要 】

The assessment of the effect of tempering temperature on hardness and impact toughness of a 56NiCrMo7 grade hot work tool steel was presented in the paper. It has been found that the investigated steel, after quenching in oil from 800°C, softens quite slowly upon tempering within the range between 100 and 675°C, which was confirmed not only by hardness measurements but also by observed changes occurring in its microstructure, whereas the impact energy (KV) absorbed by the test specimen increases with temperature, achieving >66J after tempering at 675°C. The changes observed in the character of the fracture surfaces allows of interpretation of the impact test results for the whole range of tempering temperatures.

【 授权许可】

Unknown