Dynamic model of cage induction motor with number of rotor bars as parameter

The Journal of Engineering

Gojko Joksimović¹ 

[1] Faculty of Electrical Engineering, University of Montenegro, George Washington boulevard b.b., 81000, Podgorica, Montenegro

关键词: steady-state regime;    cage induction motor dynamic model;    stator winding;    stator slots;    dynamic mathematical model;    rotor bars;   

DOI  :  10.1049/joe.2017.0074

学科分类：工程和技术（综合）

来源: IET

【 摘 要 】

A dynamic mathematical model, using number of rotor bars as parameter, is reached for cage induction motors through the use of coupled-circuits and the concept of winding functions. The exact MMFs waveforms are accounted for by the model which is derived in natural frames of reference. By knowing the initial motor parameters for a priori adopted number of stator slots and rotor bars model allows change of rotor bars number what results in new model parameters. During this process, the rated machine power, number of stator slots and stator winding scheme remain the same. Although presented model has a potentially broad application area it is primarily suitable for the analysis of the different stator/rotor slot combination on motor behaviour during the transients or in steady-state regime. The model is significant in its potential to provide analysis of dozen of different number of rotor bars in a few tens of minutes. Numerical example on cage rotor induction motor exemplifies this application, including three variants of number of rotor bars.

【 授权许可】

CC BY