Bipolar latch with compensated keep-alive current

The Journal of Engineering

Dr. Hans Gustat¹ 

[1] Dept. Circuit Design, IHP - Institute for High-Performance Microelectronics, Im Technologiepark 25, D-15236 Frankfurt (Oder)

关键词: flip-flops;    bipolar latch;    clocked comparators;    compensation technique;    clocked differential stage;    maximum clock rate;    compensated keep-alive current;   

DOI  :  10.1049/joe.2015.0017

学科分类：工程和技术（综合）

来源: IET

【 摘 要 】

A permanent current in addition to the main clocked current is sometimes used to increase the maximum clock rate of a bipolar latch. Although it speeds up the activation of a clocked differential stage, it deteriorates the latch function by the additional current in the inactive phase of each differential stage. Thus, a keep-alive current must be kept small with respect to the main clocked current. In this Letter, a compensation technique is shown avoiding the erroneous output of a keep-alive current. It still speeds up the activation of the main transistor pair, but results in a constant symmetric offset without affecting the differential value of the output voltage. In simulations of flip-flops and clocked comparators, this compensated keep-alive current has a much larger effect on the maximum clock rate than the uncompensated keep-alive current used so far.

【 授权许可】

CC BY