CFD MODELING OF A SOLITARY WAVE OVERTOPPING BREAKWATER OF VARYING SUBMERGENCE

Proceedings of the International Conference on Coastal Engineering

Mehrdad Bozorgnia¹  Amirhossein Eftekharian²  Jiin Jen Lee² 

[1] Formerly University of Southern California;University of Southern California

关键词: Wave overtopping;    Wave breaking;    Vortical motion;    Solitary wave;    Computational Fluid Dynamic;    Turbulence modeling.;   

DOI  :  10.9753/icce.v34.waves.7

学科分类：建筑学

来源: Coastal Engineering Research Council

【 摘 要 】

In this paper, interaction of a nonlinear solitary wave with a submerged breakwater as well as a breakwater with zero freeboard are modeled using Computational Fluid Dynamic (CFD). Simulation results of water particle velocities as well as water surface elevations at the vicinity of breakwater are validated by comparison to experimental data. In order to find out the best turbulence modeling appropriate for wave-breakwater interaction problem, simulations are conducted using standard K-Epsilon, SST-K Omega, and inviscid models available within the CFD software. In cases involving wave breaking, simulations are also repeated using second order SST-K-Omega model. The overall pattern of the wave interaction with breakwater is adequately reproduced by the CFD software. The processes of wave reflection, wave breaking, and vortical motion at the vicinity of breakwater are correctly captured. The good results achieved are promising regarding the use of CFD for design of breakwaters and other marine structures subject to waves.

【 授权许可】

CC BY