Power amplifier- memory-less non linear modeling

International Journal of Physical Sciences

Pasricha R.¹ 

关键词: Nonlinearity;    memory-less;    distortion;    intermodulation.;   

DOI  :  10.5897/IJPS11.464

学科分类：物理（综合）

来源: Academic Journals

【 摘 要 】

The power amplifier’s nonlinearity broadens the input signal’s bandwidth. This is known as spectral re-growth which is undesirable since it causes interference with adjacent channels. It also causes distortions within the signal bandwidth, which affects the bit error rate at the receiver. Most recent transmission schemes, such as wideband code division multiple access (WCDMA) or orthogonal frequency division multiplexing (OFDM), are especially vulnerable to the nonlinear distortions due to high fluctuations in their power levels. To ensure that linearity is maintained to a high degree, it is necessary to examine the nature of amplifier distortion. Audio amplifier distortion is of concern for many years. The conventional feedback techniques used at audio frequencies are not applicable to many RF amplifiers due to following problems: 1. Stability at high bandwidth.2. Cost for high gains in RF stages. Memory less or Instantaneous Nonlinear Model assumes that the PA has no memory effects, that is, it has no knowledge of past events and hence the present o/p signal is only a function of present i/p signal. The model is further simplified by restricting the analysis to signal and distortion contained within the first harmonic zone, such models are referred to as band pass memory-less nonlinear models and are further simplified since they do not need to model even order nonlinearities. A memory less nonlinear model can be modeled in polar (amplitude and phase) or Cartesian (I and Q) form.

【 授权许可】

CC BY