An Open Source, FPGA-Based LeKID Readout for BLAST-TNG: Pre-Flight Results

Journal of Astronomical Instrumentation

K. KUEHN¹  R. HUPE² 

[1] Argonne National Laboratory, Lemont, IL 60439, USA;Department of Physics, The Ohio State University, Columbus, OH 43210, USA

关键词: Detector readout;    CASPER;    FPGA design;    mm and sub-mm wave astronomy;   

DOI  :  10.1142/S2251171716410038

学科分类：天文学(综合)

来源: World Scientific Publishing Co. Pte. Ltd.

【 摘 要 】

We present a highly frequency multiplexed readout for large-format superconducting detector arrays intended for use in the next generation of balloon-borne and space-based sub-millimeter and far-infrared missions. We will demonstrate this technology on the upcoming NASA Next Generation Balloon-borne Large Aperture Sub-millimeter Telescope (BLAST-TNG) to measure the polarized emission of Galactic dust at wavelengths of 250, 350 and 500 microns. The BLAST-TNG receiver incorporates the first arrays of Lumped Element Kinetic Inductance Detectors (LeKID) along with the first microwave multiplexing readout electronics to fly in a space-like environment and will significantly advance the TRL for these technologies. After the flight of BLAST-TNG, we will continue to improve the performance of the detectors and readout electronics for the next generation of balloon-borne instruments and for use in a future FIR Surveyor.

【 授权许可】

Unknown