Investigation of the surface relief of polyalkaneimide composites after treatment with oxygen plasma

9th International Multidisciplinary Scientific and Research Conference "Modern Issues in Science and Technology" Workshop "Advanced Technologies in Aerospace, Mechanical and Automation Engineering"

自然科学;工业技术

Pavlenko, V.I.^1 ; Cherkashina, N.I.^1

Belgorod State Technological University Named after V.G. Shoukhov, 46 Kostyukov str., Belgorod

308012, Russia^1

关键词: After-treatment;    Atomic oxygen;    Flow of oxygen;    Oxygen atom;    Oxygen plasma treatments;    Oxygen plasmas;    Probe methods;    Surface reliefs;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/450/2/022017/pdf
DOI  :  10.1088/1757-899X/450/2/022017

来源: IOP

【 摘 要 】

The paper presents data on the treatment of the flow of oxygen plasma of polyalkanimide and polyalkanimide composites. The hydrophobic SiO2 was used as a filler. The fluency of oxygen atoms was 5.4 × 1018 at/cm2 (equivalent to 10 years of exposure to atomic oxygen). Studies of the evolution of the surface relief of pure polyalkanimide and a composite containing 65 wt% SiO2 under the action of oxygen plasma were performed by the probe method. It was shown that after oxygen plasma treatment of a sample of pure polyalkanimide or its composites, the surface acquires a peculiar grainy relief that was formed by depressions and elevated areas of conical and acicular shape oriented towards the flow of atomic oxygen. It has been established that the introduction of crystalline SiO2 into polyalkanimide significantly increases the resistance of the polymer to the action of the oxygen plasma flow. Data on the change in the contact angle of wetting of the surface of polyalkanimide and polyalkanimide composites after treatment with an oxygen plasma flow are presented.