Working position with recomposed production systems

9th International Multidisciplinary Scientific and Research Conference "Modern Issues in Science and Technology" Workshop "Advanced Technologies in Aerospace, Mechanical and Automation Engineering"

自然科学;工业技术

Bobrovskij, Igor^1,2 ; Gorshkov, Boris^3 ; Odnoblyudov, Maksim^4 ; Kanatnikov, Nikita^5 ; Melnikov, Pavel^1

Togliatti State University, Togliatti, Russia^1

Samara Scientific Centre, Russian Academy of Sciences, Samara, Russia^2

Volga Region State University of Service, Togliatti, Russia^3

St. Petersburg Polytechnic University, St. Petersburg, Russia^4

Orel State University, Orel, Russia^5

关键词: Automatic lines;    Design features;    High productivity;    Machine building;    Production system;    System elements;    Time between failures;    Turning centre;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/450/3/032049/pdf
DOI  :  10.1088/1757-899X/450/3/032049

来源: IOP

【 摘 要 】

High productivity and flexibility with a different range of production type can be achieved by using the recomposed production systems. These systems combine the advantages of aggregate machines and turning centres due to the design features described in this article. The types of nodes and system elements in the compiled and decompiled state are given. Algorithms and schemes for the functioning of recomposed work stand (RWS) in comparison with the working stand of automatic lines (WSAL) were developed. Equation for determining the average time between failures of the RWS is presented. The visualization of the system element and the scheme of the system element - the intermodular element of locating (IEB) was performed. In the conditions of the actual machine-building production, the accuracy of estimating the economic effect requires the use of robust design models implemented not only in the form of algorithms, but also in programs. In the future, it is planned to develop a special software allowing to determine the reliability of the RWS relative to the stand with a rigid interaggregate relation.