On the peculiarities of wear-resistant nanocoatings research under production conditions. Obtaining calculated dependencies

9th International Multidisciplinary Scientific and Research Conference "Modern Issues in Science and Technology" Workshop "Advanced Technologies in Aerospace, Mechanical and Automation Engineering"

自然科学;工业技术

Chemborisov, N.A.^1 ; Ustinov, I.K.^1 ; Artemenko, O.A.^1

Kaluga Branch Bauman Moscow State Technical University, 2 Bagenov street, Kaluga

248000, Russia^1

关键词: Cutting part;    Nano-coatings;    Production process;    Wear resistant;    Wear-resistant coating;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/450/2/022021/pdf
DOI  :  10.1088/1757-899X/450/2/022021

来源: IOP

【 摘 要 】

In this paper, we consider the main types of wear-resistant nanocoatings application, a method for determining the wear resistance is presented, which was developed based on experimental data on the wear resistance of cutting tools, with the deposition of a wear - resistant coating of titanium nitride. This article discusses the increase of the cutting tools effectiveness with the use of the cutting parts deposition with wear - resistant coating of titanium nitride. Axial tools, as well as cutters with wear-resistant coatings and without were studied within the framework of the PJSC "KAMAZ" production process. The data obtained from the studies of all groups of instruments are shown in the tables, they are presented in graphs and diagrams. Recommendations are given to increase the durability of the cutting tools, as well as to optimize the tool turnover in the production process.