On the peculiarities of wear-resistant nanocoatings research under production conditions. Part 2. Experiment results

9th International Multidisciplinary Scientific and Research Conference "Modern Issues in Science and Technology" Workshop "Advanced Technologies in Aerospace, Mechanical and Automation Engineering"

自然科学;工业技术

Chemborisov, N.A.^1 ; Ustinov, I.K.^1 ; Artemenko, O.A.^1

Kaluga Branch Bauman Moscow State Technical University, 2 Bagenov street, Kaluga

248000, Russia^1

关键词: Cutting part;    Joint stock companies;    Nano-coatings;    Production process;    Useful life;    Wear resistant;    Wear-resistant coating;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/450/2/022025/pdf
DOI  :  10.1088/1757-899X/450/2/022025

来源: IOP

【 摘 要 】

This article provides experimental data on improving the effectiveness of the use of cutting tools coated with wear-resistant nanocoatings along the cutting parts. Drills, countersinks, countersinks, reamers, mills, taps with wear-resistant coatings and without them are studied in the production process of public joint-stock company KAMAZ. The data obtained in the course of research of all groups of instruments were taken as the basis to develop calculated dependencies to improve the period of their useful life. Recommendations are given to increase the durability of the cutting tools, as well as to optimize the tool turnover in the production process.