Performance of post-hidrothermally treated xerogel TiO2 dye-sensitized solar cell (DSSC) and its nanostructure characteristic

1st Materials Research Society Indonesia Conference and Congress

Priyono, B.^1 ; Yuwono, A.H.^1 ; Syahrial, A.Z.^1 ; Mustofa, M.H.^1 ; Bawono, R.S.^1

Department of Metallurgical and Materials Engineering, University of Indonesia, Depok

16425, Indonesia^1

关键词: Brunauer emmett tellers;    Diffuse reflectance spectroscopy;    Hydrothermal process;    Open-voltage circuits;    Optimum parameters;    Photovoltaic solar cells;    Renewable energy source;    TiO2 nano-particles;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/432/1/012030/pdf
DOI  :  10.1088/1757-899X/432/1/012030

来源: IOP

【 摘 要 】

Dye-sensitized solar cell (DSSC) is one of photovoltaic solar cells, which is very favorable as alternative renewable energy source to anticipate the diminishing the fossil fuel due to its low-cost, ease of production and eco-friendliness. This work is aimed to investigate the correlation between TiO2 nanostructure properties i.e.: crystallite size, surface area, band gap energy to obtain the optimum parameter for best performance as DSSC prototype. At this study, TiO2 nanoparticles were synthesized via sol-gel process using titanium tetra-n-butoxide, ethanol, hydrochloric acid and deionized water with the ratio of (0.4 : 0.83 : 1 and 1.39) respectively upon sol preparation. The followed with multi-step calcinations to obtain anatase phase and post-hydrothermal process with various temperatures (100, 120, and 150 C). As comparison, TiO2 of P25 Degussa was used and also assembled to make DSSC. The X-ray diffraction, BET (Brunauer-Emmett-Teller) and UV-Vis DRS (diffuse reflectance spectroscopy) tests were taken to characterize the samples. The performance of DSSC was investigated using open voltage circuit (Voc) measurement. The characterization results of synthesis powder shows indication at temperature 150°C was optimum process of post-hydrothermal with crystallite size 10.55 nm, surface area 95.38 m2/grams, and band gap energy 3.16 eV. Nevertheless, the open circuit voltage (VOC) measurement reveals that the DSSC fabricated with post-hydrothermal at temperature process 120C provide the highest voltage (250 mV).