Characteristic of Solid Metal using Underground Explosion Pressing

International Conference on Advanced Manufacturing and Industry Applications

机械制造;工业技术

Azmi, Nor Azmaliana^1 ; Hilmi, Ahmad Humaizi^1 ; Alias Yusof, M.^2 ; Ismail, Ariffin^2

School of Manufacturing Engineering, Universiti Malaysia Perlis, Malaysia^1

Faculty of Defence Studies and Management, Universiti Pertahanan Nasional Malaysia, Malaysia^2

关键词: Detonation velocity;    Explosive charges;    Pressure-based;    Rockwell;    Solid metals;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/429/1/012096/pdf
DOI  :  10.1088/1757-899X/429/1/012096

学科分类：工业工程学

来源: IOP

【 摘 要 】

This paper presents the results of an experimental study aim at enhancing the understanding of some characteristics of an interior explosion within a confined underground area on specimen used, as well as the effect of the explosive charge size on the pressure distribution along the compacted specimen which is placed in the apparatus. The study involved blast test which provides a measured pressure based on the amount of explosive used. The type of explosive used for this experiment is Emulex with detonation velocity range from 4500m/s to 5400m/s. The microstructure of specimen A and B is analyzed using Scanning Electron Microscope (SEM). Then, the hardness of both specimens is tested using Rockwell Digital Hardness and the result for specimen A is 33.8HRA, while for specimen B is 43.7HRA. Besides that, the bending strength of specimen A and B had been tested using Calcium Carbide Explosive Shape charge and the force that applied to the specimen B during the bending strength is 243,160.68kN, while for specimen A, there is no effect of bending strength test.