Study on the window cooling system of 300 keV Electron Accelerator

International Nuclear Science, Technology and Engineering Conference 2017

原子能学

Leo, K.W.^1 ; Chulan, R.M.^1 ; Hashim, S.A.^1 ; Azhar, M.^1 ; Dalim, Y.^1 ; Mokhtar, M.^1 ; Baijan, A.H.^1 ; Sabri, R.M.^1 ; Faiz, M.^1 ; Azaman, A.^1 ; Rosli, R.C.^1

Malaysian Nuclear Agency, Bangi Kajang. Selangor

43000, Malaysia^1

关键词: Accelerating tube;    Air cooling system;    Beam energies;    High voltage;    Low energy electron accelerators;    Pressure-based;    Vacuum environment;    Window cooling;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/298/1/012045/pdf
DOI  :  10.1088/1757-899X/298/1/012045

来源: IOP

【 摘 要 】

This paper describes the method used to identify the parameters required for the window cooling system. This locally designed low energy electron accelerator with the present energy of 140 keV will be upgraded to 300 keV. The heat will be increased due to the increment of the beam energy; therefore an appropriate cooling system is required to prevent the breaking of the few μmm titanium window. The broken window will disrupt the beam transportation inside the vacuum environment of the accelerating tube and also the high voltage will be breakdown if the vacuum environment couldn't be sustained. Therefore, a desired air cooling system to cool down the 9 kwatt (30 mA, 300 keV) beam power has been designed. As the result, the window cooling system with the required pressure based on the beam powers have been calculated and identified.