Effect of processing parameters on the shrinkage behaviour of injection moulded polypropylene gear

International Conference on Advanced Manufacturing and Industry Applications

机械制造;工业技术

Jamaluddin, A.A.^1 ; Mehat, N.M.^2 ; Kamaruddin, S.^1

Mechanical Engineering Department, Universiti Teknologi PETRONAS, Seri Iskandar, Perak Darul Ridzuan

32610, Malaysia^1

Department of Mechanical Engineering Technology, Faculty of Engineering Technology, Uniciti Alam Campus, Universiti Malaysia Perlis, Sungai Chuchuh, Padang Besar, Perlis

02100, Malaysia^2

关键词: Continuous improvements;    Optimal processing;    Parameters setting;    Process parameters;    Processing parameters;    Quality characteristic;    Quality performance;    Shrinkage behaviour;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/429/1/012099/pdf
DOI  :  10.1088/1757-899X/429/1/012099

学科分类：工业工程学

来源: IOP

【 摘 要 】

The polymer gears are widely used as basic motion transfer elements in many industries. Continuous improvement on the quality performance of polymer gears is very important for their ability to meet present demand. So that, controlling the parameters setting in polymers gears are very importance in order to get the best gears quality. In this study, the influences of injection moulding processing parameters on shrinkage of polypropylene gears was investigated by using Taguchi approach. It was found that the optimal processing parameters for addendum circle shrinkage, dedendum circle shrinkage and tooth thickness shrinkage are A1B1C3D3E1F2G3, A3B1C3D3E3F1G3, and A1B3C3D2E3F2G1 respectively. This results showed that pattern of fluctuation showed either an improvement or reduction in quality characteristics upon the change of process parameters setting.