Design of Porous Structures in Shape Memory Alloy Systems

7th International Conference on Advanced Materials and Structures

Sprincenatu, R.^1 ; Novac, A.^1 ; Chilnicean, G.^1 ; Bolocan, V.^1 ; Craciunescu, C.^1

Department of Materials and Manufacturing Engineering, Faculty of Mechanical Engineering, Politehnica University Timisoara, Bd. Mihai Viteazul 1, Timisoara

300006, Romania^1

关键词: Micro-structural;    Optimal processing;    Porous shape memory alloy;    Porous structures;    Shape-memory materials;    Solid state sintering;    Spacer materials;    Spark plasma sintering techniques;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/416/1/012016/pdf
DOI  :  10.1088/1757-899X/416/1/012016

来源: IOP

【 摘 要 】

The fabrication of porous shape memory alloys is analyzed based on the particularities of the alloy families and the spacer materials potentially to be used for pores generation. The analysis is made for two distinct set of shape memory alloy families Cu-based and Ti-based, taking into account solid state sintering technologies. Sodium chloride, magnesium and carbamide are comparatively analysed for the use in the fabrication of the porous shape memory materials. Particularities in using spark plasma sintering technique for the fabrication of porous shape memory alloys is discussed. Experiments performed on alloys belonging to the shape memory system are analyzed from macro and microstructural point of view in order to assess the influence on the resulting functionality. The results allowed the selection of the optimal processing parameters for the fabrication of porous alloys.