Validation of auto-generated material removal volume for regular form milling part

International Conference on Advanced Manufacturing and Industry Applications

机械制造;工业技术

Kataraki, Pramod S.^1 ; Abu Mansor, Mohd Salman^1

School of Mechanical Engineering, Engineering Campus, Universiti Sains Malaysia, Nibong Tebal, Pulau Pinang

14300, Malaysia^1

关键词: Conventional machining;    Feature recognition;    Form features;    Form millings;    Material removal;    Primary objective;    Real time;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/429/1/012094/pdf
DOI  :  10.1088/1757-899X/429/1/012094

学科分类：工业工程学

来源: IOP

【 摘 要 】

Feature recognition is the primary objective to be achieved for the attainment of generative CAPP system. The feature recognition works performed so far have been successful in recognizing and generating material removal volume for regular form features of regular form parts. These material removal volumes provide detailed information about the amount of material to be machined in each process thereby eliminating the detailed designing stage employed in conventional machining process. But the generated material removal volume (MRV) were not validated by real time mill machining, so an effort is made to validate the feature recognition works by real time mill machining using the material removal volume. From the real time mill machining it can be said that there is zero wastage of material and part obtained is of accurate dimensions.