Developmental Design of an Orthopaedic Recovery System

2nd International Conference on Engineering for Sustainable World

Ohijeagbon, I.O.^1 ; Omoragbon, O.C.^1 ; Aweda, J.O.^1 ; Adekunle, A.S.^1 ; Opadiji, J.F.^1

Department of Mechanical Engineering, University of Ilorin, Ilorin, Nigeria^1

关键词: anthropological data;    Hydraulic system;    Operational loads;    power;    Recovery systems;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/413/1/012045/pdf
DOI  :  10.1088/1757-899X/413/1/012045

来源: IOP

【 摘 要 】

A developmental design of an orthopaedic recovery system has been conducted. Anthropological data of mass and length distribution of the body segments were used to estimate the components and total length of the main supporting frame and maximum body load that may be accommodated by the system. Vital geometrical, operational load and power parameters were also designed for the required hydraulic subsystems. Results show that the total length of the main supporting frame of the system is 2.237 m and the maximum body load that can be accommodate on the system is 371 kg. The load and power requirements were highest at the hip joint, with the following values: maximum supporting load 2,313.16 N, internal pressure of hydraulic system 379.89 kN/m2, buckling load of connecting rod 9252.64 N, critical buckling load of hydraulic system 13370.06 N, required power 86.56 W, expected electrical power input 149.93 W and spring stiffness 6.18 kN/m respectively. When constructed, the developed design is expected to facilitate treatment and recovery of orthopaedic patients. Physiotherapeutic services for body joints related problems would be greatly aided to offer better quality services. Required human involvement and effort on the side of the service providers shall be greatly reduced.