Locating the maximum power point for thermoelectric generators for constant heat operation

TK Electrical engineering. Electronics Nuclear engineering

Ashraf, Ali ; Knox, Andrew

University:University of Glasgow

Department:School of Engineering

关键词: Thermoelectric generators, maximum power point, TEG, MPP, bismuth telluride, heat, electricity.;   

Others  :  http://theses.gla.ac.uk/7770/1/2016AshrafMSc.pdf

来源: University of Glasgow

【 摘 要 】

Thermoelectric generators (TEGs) are solid-state devices that can be used for the direct conversion between heat and electricity. These devices are an attractive option for generating clean energy from heat. There are two modes of operation for TEGs; constant heat and constant temperature. It is a well-known fact that for constant temperature operation, TEGs have a maximum power point lying at half the open circuit voltage of the TEG, for a particular temperature. This work aimed to investigate the position of the maximum power point for Bismuth Telluride TEGs working under constant heat conditions i.e. the heat supply to the TEG is fixed however the temperature across the TEG can vary depending upon its operating conditions. It was found that for constant heat operation, the maximum power point for a TEG is greater than half the open circuit voltage of the TEG.