Formulation process making of Aloe vera mask with variable percentage of Aloe vera gel extract

2017 1st International Conference on Engineering and Applied Technology

Hendrawati, T.Y.^1 ; Nugrahani, R.A.^1 ; Utomo, S.^1 ; Ramadhan, A.I.^2

Chemical Engineering Department, Faculty of Engineering, Universitas Muhammadiyah Jakarta, Indonesia^1

Mechanical Engineering Department Faculty of Engineering, Universitas Muhammadiyah Jakarta, Indonesia^2

关键词: Aloe vera;    Aloe vera gels;    Drying time;    Formulation process;    Vitamin C;    Vitamin c contents;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/403/1/012013/pdf
DOI  :  10.1088/1757-899X/403/1/012013

来源: IOP

【 摘 要 】

The purpose of this research is to get the effect of adding Aloe vera extract to mask formulation and get the best mask formula. The Aloe vera mask formulation is done with the amount of Aloe vera extract added. The mask composition consists of Polyvinyl Pirolidon K 30 (7.55%), Polyvinyl alcohol (1.51%), Methyl Paraben (0.10%), Propyl Paraben (0.10%), BHT (0.12%) and Water (90.61%). The amount of Aloe vera extract added as much as 5%, 10%, 15% and 20%. The properties of the mask tested include density, pH, vitamin C content, drying time and favorite test. The conclusions of this research were the effect of the addition of Aloe vera extract to the density, pH, vitamin C and drying time. The best content was 0.15%, 1.066 g / ml density, vitamin C 2.2 gram, pH 6.47, Drying time 25 minutes and viscosity 24,000 CP. In a favorite test with odor criteria, a soft feeling on the face, a clean feel on the face and color done on 20 panelists found the most preferred is a mask with 0.15% Aloe vera extract content.