Parametric Study of Longitudinal Hollow Steel Fibre Reinforced Concrete (SFRC)Beams

International Conference on Recent Advancements and Effectual Researches in Engineering Science and Technology

Jacob, Bibi M.^1 ; Bincy, S.^2

Structural Engineering and Construction Management, St Josephs College of Engineering and Technology, India^1

Dept. of Civil Engineering, St. Joseph's College of Engineering and Technology, Palai, Kerala, India^2

关键词: Circular holes;    Crack patterns;    Experimental program;    Hollow beams;    Longitudinal direction;    Material management;    Material optimization;    Steel fibre reinforced concrete;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/396/1/012011/pdf
DOI  :  10.1088/1757-899X/396/1/012011

来源: IOP

【 摘 要 】

The main aim of this study is to investigate on the crack patterns and flexural strength of simply supported RC rectangular hollow beams and SFRC rectangular hollow beams (with a circular hole in longitudinal direction) under a loading frame with a gradual increasing load. The experimental program consists of casting and testing of 4RC and 4 SFRC beams of size 1400 × 150 × 150. M 25 grade of concrete was used for the casting of all the beams. Hollow beams were made using pipes of diameters 32mm, 40mm and 50mm and the position of placing the pipes are at a distance of 3 to 4 cm from bottom reinforcement. All other properties of the beam were kept constant such as the cross section of the beam and the amount of longitudinal steel. In this study we also focus on the material management by the introduction of a hollow core. By this material optimization we can decrease the dead loads which contributes to the seismic effect in high rise buildings. The influence of area of hole is taken as reference for the study. A comparison of experimental results of RC and SFRC were made to predict the crack behaviour and the flexural load carrying capacity of hollow beams.