Considerations about command system for lathes with numerical controls, adaptive controls and copying system with hydraulic modules or computer assisted

10th International Symposium Machine and Industrial Design in Mechanical Engineering

工业技术;机械制造

Glavan, D.O.^1 ; Babanatsas, T.^1 ; Borzan, M.^2 ; Radu, I.^1 ; Babanatis Merce, R.M.^1

University Aurel Vlaicu of Arad, Faculty of Engineering, Arad, Romania^1

Technical University of Cluj-Napoca, Faculty of Machine Building, Cluj-Napoca, Romania^2

关键词: Adaptive Control;    Command systems;    Computer assisted;    Computer numerical control;    Cutting force controls;    Hydraulic modules;    Manufacturing process;    Numerical control;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/393/1/012084/pdf
DOI  :  10.1088/1757-899X/393/1/012084

学科分类：工业工程学

来源: IOP

【 摘 要 】

One of the most complex situation in establishing the principles of modern complex lathes design is that the tool machine has to fulfill special purposes, like working with computer numerical controls and commands, adaptive cutting force control system and use in some manufacturing phases copying functions. The main issue in this case is choosing between adding an additional axis to the basic CNC machine or equipping the machine with a special subsystem purposed for the task. This paper compares the two possibilities mentioned above from the point of view of their capacity to satisfy the needs of the copying process, the complexity, and the cost of the machine, the precision achieved in the manufacturing process, and the complexity and cost of the process itself.