Analysis of the Differences of Overlap Function of Dual Laser Beams in SO2/NO2 DIAL System

International Conference on Manufacturing Technology, Materials and Chemical Engineering

机械制造;材料科学;化学工业

Luo, Jianghua^1 ; Zhao, Xin^1 ; Jiang, Yishan^1

Section of Cabin Environment and Chemical Defense, NAVY Submarine Academy, Qingdao

266071, China^1

关键词: Gas concentration;    Geometric form;    Lidar systems;    Measurements of;    Overlap functions;    Relative standard deviations;    Retrieval accuracy;    Return signals;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/392/3/032011/pdf
DOI  :  10.1088/1757-899X/392/3/032011

学科分类：材料科学（综合）

来源: IOP

【 摘 要 】

Geometric Form Factor(GFF) or overlap function in transition range is an important factor of a lidar system, especially in a SO2 and NO2 DIAL system. An unstable overlap function will seriously affect measurements of gas concentration and degrade its retrieval accuracy in transition range. In technique of SO2 and NO2 DIAL, retrieval of gas concentration is directly related with ratio between two return signals of emitting laser beam. Construct stability of overlap between two laser beam and receiver can be estimated using the ratio between two return signals. In this paper data acquired from SO2/NO2 DIAL measurements was analyzed. Relative standard deviation of ratio between two return signals in transition range is less than 1%. It shows that Construct stability of overlap between two laser beam and receiver, and quality of laser beam are very good.