Development of software-hardware complex for investigation of the vector field of speeds in the cyclone-separator

2nd International Conference "Cognitive Robotics"

工业技术;无线电电子学;计算机科学

Borisov, A.^1

Altai State Technical University Named by I.I. Polzunova, Barnaul, Russia^1

关键词: Air flow velocity;    Air flow-rate;    Radial velocity;    Software and hardwares;    SolidWorks;    Vector fields;    Vector velocities;    Velocity vector field;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/363/1/012017/pdf
DOI  :  10.1088/1757-899X/363/1/012017

来源: IOP

【 摘 要 】

The current issue of studying the vector velocity field in a cyclone-separator with a screw insert is considered in the article. Modeling of the velocity vector field in SolidWorks was carried out, tangential, axial and radial velocities were investigated. Also, a software and hardware complex was developed that makes it possible to obtain data on the speed inside a cyclone separator. The results of the experiment showed that on flour dusts the efficiency of the cyclone separator in question was more than 99.5%, with an air flow rate of 376 m3 / h, 472 m3/h and 516 m3/h, and ΔP less than 600 Pa. The velocity in the inlet branch of the screw insert was 18-20 m / s, and at the exit of the screw insert the airflow velocity is 50-70 m / s.