Lauryl Amine as heavy metal collector of boiler ash from pulp and paper mill waste

2nd International Conference on Oleo and Petrochemical Engineering

Sembiring, M.P.^1,2 ; Kaban, J.^1 ; Bangun, N.^1 ; Saputra, E.^2

Chemistry Department, Facultyof Mathematic and Natural Science, University of Sumatera, Utara, Indonesia^1

Chemical Engeenering Department, Faculty of Engeenering, University of Riau, India^2

关键词: Cadmiums (Cd);    Combination treatments;    Heavy metal contents;    Metal collectors;    Process time;    Pulp and paper;    Pulp and paper mill;    Pulp and paper products;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/345/1/012027/pdf
DOI  :  10.1088/1757-899X/345/1/012027

来源: IOP

【 摘 要 】

Theincreasing of demand of pulp and paper products, will following with the growing the pulp and paper industryand generate significant mill waste. The total waste reached 1/3 of the amount raw materials used and ash boiler is the waste with the largest percentage of 52%. For that it takes effort to manage the existing waste. The boiler ash contained the chemical elements, it can be utilized such as fertilizer, because it also contains transition metals in form of heavy metal such as Cadmium (Cd), Cobalt (Co), Chrome (Cr), Cupprum (Cu), Ferrum (Fe), Nickel (Ni), and Zinc (Zn), the use of boiler ash must follow the threshold specified by the Government. Several studies have been undertaken to reduce and extract heavy metals from ash and sand of the boiler by using carbon dioxide as its ligand. Eelectrochemical method was used to remove and recovery of heavy metals from the incenerator. This study focused on removal of heavy metals using Lauryl Amine as collector and three solvents namely Dichloromethane, Ethanol and n-Hexane. The treatmentswas able to extract the heavy metal and generally reduce the heavy metal content of ash boiler pulp and paper mill waste. The combination treatment used toreduce the heavy metal content of 5 gram Lauryl Amine collector in Dichloromethane solvent for 4 hours process time.