Design and Simulation of a PID Controller for Motion Control Systems

3rd International Conference on Science, Technology, and Interdisciplinary Research

自然科学;工业技术

Abdullahi, Zakariyya Hassan^1 ; Danzomo, Bashir Ahmed^1 ; Abdullahi, Zainab Suleiman^2

Department of Computer Engineering Hussaini Adamu Federal Polytechnic, Kazaure, Jigawa State, Nigeria^1

Department Mechanical Engineering, Hussaini Adamu Federal Polytechnic, Kazaure, Jigawa State, Nigeria^2

关键词: Closed loop response;    Controller performance;    Design and simulation;    Discrete-time model;    Open-loop transfer functions;    Performance requirements;    Steady state errors;    Transient performance;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/344/1/012016/pdf
DOI  :  10.1088/1757-899X/344/1/012016

来源: IOP

【 摘 要 】

Motion control system plays important role in many industrial applications among which are in robot system, missile launching, positioning systems etc. However, the performance requirement for these applications in terms of high accuracy, high speed, insignificant or no overshoot and robustness have generated continuous challenges in the field of motion control system design and implementation. To compensate this challenge, a PID controller was design using mathematical model of a DC motor based on classical root-locus approach. The reason for adopting root locus design is to remodel the closed-loop response by putting the closed-loop poles of the system at desired points. Adding poles and zeros to the initial open-loop transfer function through the controller provide a way to transform the root locus in order to place the closed-loop poles at the required points. This process can also be used for discrete-time models. The Advantages of root locus over other methods is that, it gives the better way of pinpointing the parameters and can easily predict the fulfilment of the whole system. The controller performance was simulated using MATLAB code and a reasonable degree of accuracy was obtained. Implementation of the proposed model was conducted using-Simulink and the result obtained shows that the PID controller met the transient performance specifications with both settling time and overshoot less than 0.1s and 5% respectively. In terms of steady state error, the PID controller gave good response for both step input and ramp.