Solar Cell Polymer Based Active Ingredients PPV and PCBM

2nd International Conference on Mathematics, Science, Education and Technology

数学;自然科学;教育

Hardeli, H.^1 ; Sanjaya, H.^1 ; Resikarnila, R.^1 ; Nitami, H.R.^1

Chemistry Department, Universitas Negeri Padang, Indonesia^1

关键词: Active ingredients;    Active material;    Annealing temperatures;    Electrical energy;    Glass substrates;    Morphological control;    Polymer based;    Polymer bulk heterojunctions;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/335/1/012029/pdf
DOI  :  10.1088/1757-899X/335/1/012029

来源: IOP

【 摘 要 】

A polymer solar cell is a solar cell based on a polymer bulk heterojunction structure using the method of thin film, which can convert solar energy into electrical energy. Absorption of light is carried by active material layer PPV: PCBM. This study aims to make solar cells tandem and know the value of converting solar energy into electrical energy and increase the value of efficiency generated through morphological control, ie annealing temperature and the ratio of active layer mixture. The active layer is positioned above the PEDOT:PSS layer on ITO glass substrate. The characterization results show the surface morphology of the PPV:PCBM active layer is quite evenly at annealing temperature of 165 ° C. The result of conversion of electrical energy with a UV light source in annealing samples with temperature 165 ° C is 0.03 mA and voltage of 4.085 V with an efficiency of 2.61% and mixed ratio variation was obtained in comparison of P3HT: PCBM is 1: 3