Increase of rotation angle of soil layers during plow operation

International Conference on Mechanical Engineering, Automation and Control Systems 2017

机械制造;无线电电子学;计算机科学

Vasilenko, V.V.^1 ; Afonichev, D.N.^1 ; Vasilenko, S.V.^1 ; Khakhulin, A.N.^1

Voronezh Agrarian University, Michurin Av. 1, Voronezh

394087, Russia^1

关键词: Average angle;    Industrial samples;    Plant residues;    Power costs;    Rotation angles;    Soil pressure;    Working body;    Working element;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/327/4/042114/pdf
DOI  :  10.1088/1757-899X/327/4/042114

学科分类：计算机科学（综合）

来源: IOP

【 摘 要 】

One of the advantages of plowing is the ability of the plow to hide the weed seeds deep into the soil. The depth of the embankment exceeds 10-12 cm, from there the weeds can not rise to the surface of the soil. They perish halfway. But for this, it is necessary to wrap the soil layers at an angle close to 180 °. Modern ploughs can not turn the layers of soil at an angle of more than 135 °, therefore the plow is required to be equipped with additional working elements. The aim of the study is to create an adaptation to the plow to expand the furrow before laying the next soil layer. In a wide furrow, the formation will completely tip, the previous layer will not interfere with it. The device is a set of vertical shields. Each shield is fixed behind the working body of the plow. It is installed with an angle of attack of 20-25 ° to move the previous layer to expand the furrow by 10-12 cm. The model and industrial samples of the plow have shown improved agrotechnical indicators. The average angle of the formation rotation was 177 °, the burial of plant residues in the soil increased from 61 to 99%. The field surface with blocks more than 5 cm decreased from 36.3 to 13.4%, the height of the ridges decreased from 7 to 4 cm. The force of soil pressure on the shield was measured by a strain gage. It is 130-330 N depending on the depth of processing and the speed of movement. The increase in power costs for the four-hull plow was 190-750 W. The coulters on the plow are unnecessary, and this saves energy more than its increase for shields.