Determination of high-strength materials diamond grinding rational modes

International Conference on Mechanical Engineering, Automation and Control Systems 2017

机械制造;无线电电子学;计算机科学

Arkhipov, P.V.^1 ; Lobanov, D.V.^2 ; Rychkov, D.A.^1 ; Yanyushkin, A.S.^2

Bratsk State University, Makarenko St. 40, Irkutsk region, Bratsk

665709, Russia^1

Ulianov Chuvash State University, Av. Cheboksary 15, Moscow

128010, Russia^2

关键词: Abrasive processing;    Diamond grinding;    Economic indicators;    Experimental research;    High-strength materials;    Mechanical and electrical;    Production problems;    Technological factors;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/327/4/042009/pdf
DOI  :  10.1088/1757-899X/327/4/042009

学科分类：计算机科学（综合）

来源: IOP

【 摘 要 】

The analysis of methods of high-strength materials abrasive processing is carried out. This method made it possible to determine the necessary directions and prospects for the development of shaping combined methods. The need to use metal bonded diamond abrasive tools in combination with a different kind of energy is noted to improve the processing efficiency and reduce the complexity of operations. The complex of experimental research on revealing the importance of mechanical and electrical components of cutting regimes, on the cutting ability of diamond tools, as well as the need to reduce the specific consumption of an abrasive wheel as one of the important economic indicators of the processing process is performed. It is established that combined diamond grinding with simultaneous continuous correction of the abrasive wheel contributes to an increase in the cutting ability of metal bonded diamond abrasive tools when processing high-strength materials by an average of 30% compared to diamond grinding. Particular recommendations on the designation of technological factors are developed depending on specific production problems.