Modeling of thermal mode of drying special purposes ceramic products in batch action chamber dryers

International Conference on Mechanical Engineering, Automation and Control Systems 2017

机械制造;无线电电子学;计算机科学

Lukianov, E.S.^1 ; Lozovaya, S. Yu.^1 ; Lozovoy, N.M.^1

Belgorod State Technological University Named after V.G. Shukhov, 46 Kostyukov Street, Belgorod

308012, Russia^1

关键词: Capillary force;    Heat-transfer agents;    Processing lines;    Shrinkage deformation;    Thermal modes;    Uniform temperature field;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/327/2/022043/pdf
DOI  :  10.1088/1757-899X/327/2/022043

学科分类：计算机科学（综合）

来源: IOP

【 摘 要 】

The article is devoted to the modeling of batch action chamber dryers in the processing line for producing shaped ceramic products. At the drying stage, for various reasons, most of these products are warped and cracked due to the occurrence of irregular shrinkage deformations due to the action of capillary forces. The primary cause is an untruly organized drying mode due to imperfection of chamber dryers design specifically because of the heat-transfer agent supply method and the possibility of creating a uniform temperature field in the whole volume of the chamber.