Development of Product Availability Monitoring System In Production Unit In Automotive Component Industry

4th Asia Pacific Conference on Manufacturing Systems; 3rd International Manufacturing Engineering Conference

Hartono, Rachmad^1,2 ; Raharno, Sri^1 ; Martawirya, Yatna Yuwana^1 ; Arthaya, Bagus^3

Department of Mechanical Engineering, Institut Teknologi Bandung, Bandung

40132, Indonesia^1

Departement of Mechanical Engineering, Pasundan University, Bandung

40153, Indonesia^2

Department of Mechatronics Engineering, Faculty of Industrial Engineering, University of Parahyangan, Bandung, Indonesia^3

关键词: Automotive component;    Automotive component industry;    Finished products;    Monitoring system;    Product availability;    Product warehouse;    Production process;    record;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/319/1/012014/pdf
DOI  :  10.1088/1757-899X/319/1/012014

来源: IOP

【 摘 要 】

This paper described a methodology to monitor the availability of products in a production unit in the automotive component industry. Automotive components made are automotive components made through sheet metal working. Raw material coming into production unit in the form of pieces of plates that have a certain size. Raw materials that come stored in the warehouse. Data of raw each material in the warehouse are recorded and stored in a data base system. The material will then undergo several production processes in the production unit. When the material is taken from the warehouse, material data are also recorded and stored in a data base. The data recorded are the amount of material, material type, and date when the material is out of the warehouse. The material coming out of the warehouse is labeled with information related to the production processes that the material must pass. Material out of the warehouse is a product will be made. The products have been completed, are stored in the warehouse products. When the product is entered into the product warehouse, product data is also recorded by scanning the barcode contained on the label. By recording the condition of the product at each stage of production, we can know the availability of the product in a production unit in the form of a raw material, the product being processed and the finished product.